Stagecoach - Wheels are done! Sorta...

This will be a bit of a catch up post on the Stagecoach.  I've been chipping away at the wheels over the last month or so.  They are mostly finished, with a few more steps to go.

After the rims, where we left off in December, the next step was to cut the spokes and shape them. 

The spokes as they started:

Then, once the spokes were cut (48 in all) two sides of each one had to be sanded flat.  The directions said to sand down the sides of the long pieces before cutting, but I didn't have a way to make sure they stayed even all the way down, so I chose to sand after cutting.  This might have made more work for me, but it turned out okay.

Here is how I flattened the sides - a jeweler's vise and an emery board:

Here are 12 of the spokes, cut and shaped:

Around the time I had cut all of the spokes to the specified lengths, I started watching some online videos about wagon wheel making.  It was then that I wished I'd done that sort of research first as I would have loved to add another layer of realism to this project by building the wheels just like real ones are made.  (such as doweling the ends of the spokes to fit them into the rim pieces, rather than building the rim and then cutting the spokes to fit in between the rim and hub) 

Ah well, there wasn't much that could be done about it after the fact.  However, I ended up having so much fun making these wheels that I'd really like to make more in the future.  I would like to try and make them the way full-size wheels are made.

In the meantime, for this project...

This will be a wheel!:

Once again, I broke out my block of foam, T-pins, glue, and set off to work. 

Four spokes on: 

All spokes on:

The first finished wheel, a front one, released from the foam.  Wow, this turned out quite a bit better than I had hoped!:

A fun shot to show the size, next to a trusty coffee cup:

Fast forward a few days and I had all four wheels completed:

Again, here with a coffee cup:

Although Jeff and I both liked the wooden look quite a bit (all the more incentive to build more minature wheels in the future!) the directions call for a paint job.  So I've spent several sessions applying a few coats of paint on the wheels - save for the inside, flat edges of the spokes.

The painted wheels:

In what seemed to be a departure from the amazing realism of the model kit, the wheel treads are to be made from thin strips of... wood.  We were disappointed at first, why aren't they metal, as a real wheel tread would be?  I have a theory.  I think wood is used to better simulate the texture of the outer metal band after it has seen use.  I can imagine it would be hard to replicate that look with minature strips of actual metal.  That's my theory anyway.

The strips that are to be the treads have to be stained/painted.  The directions call for using a mixture of "shoe polish and solvant".  That was a bit of a mystery to solve, as I'd never heard of such a thing - and neither of those items have found their way into my life in the past! 

Oh boy... Ok, here we go!:

The tread strips with their first application of stain.  I think they are looking good and my theory of using stained wood for the texture seems to work.  To me, they do look like scratched up strips of metal:

In addition to the tread being needed to fully finish the wheels, I also need to put in some nails...  lots of nails...  Itty bitty nails...

Here we have 48 - Five millimeter brass nails:

But wait, they aren't small enough.  They will be nailed in on the front AND back of the wheels, which are 5mm wide.  So the directions say to cut the 5mm nails in half.  My first reaction was:  You can't be serious...  Then I realized that they were.  So it was needlenose pliers and cutters to the rescue:

Here are 48 - Five millimeter brass nails, that were cut off to be - approximately - half as long.

The process turned out to be much easier than I thought, although a little time consuming.


So, there you have it!  We are all caught up on the Project Stagecoach.  (I just finished staining wheel tread and cutting some of the nails a few hours ago - so those pictures are about as fresh as it gets - haha)

All together I'm having a lot of fun, though I am still intimidated by this whole project - it is so full of things I've never done before.  It is a challenge, but that will make it all the more rewarding with this thing is "rolling"! 

Slow Start Here, But Busy!

A much belated Happy New Year to my readers!  I hope you all had a great Holiday season and that your 2013 is off to a good start!

The year has been off to a slow start as far as blogging and such (obviously!) but I have been very busy "behind the scenes".  I have several new greeting cards that will be on ArtFire very soon.  I've also gotten back to work on Project Stagecoach, after taking a bit of an intimidated hiatus.  I had to build the wheels and I was very nervous about that.  However, it went MUCH better than I had expected.  In fact, I had so much fun that I've given serious consideration to going into a side business of making miniature wagon wheels!  Yet another iron in the fire I suppose...  First it'd be nice to finish the leviathon stagecoach project.

I will be catching up on Stagecoach posts here soon; I've been continuing to take pictures every step along the way.  In the meantime, here's a bit of a teaser photo - the finished wheels:

"Finished" is a loose term, because after this they had to be sanded, painted, wheel tread applied, and itty bitty nails put in around the rim.  I'm in the midst of all of that now.  So in that picture, they were finished as far as the rim, spokes, and hub all being in place.  I think they looked pretty sharp as plain wood.  I hope I can get some more wheels made from scratch in the future for different projects or maybe just to try selling on their own. 

I've also been tatting away.  I made several bookmarks and gave a few out as Christmas presents.  I also finished my first doily, using a two color thread technique that my Granny explained over the phone.  I'm now working on a pattern Granny sent me that is a wedding dress for a Barbie doll.  She told me that she won a blue ribbon at the county fair with the dress.  I'm hoping to enter one of my own in our fair - in August.  I hope I'll be done with it by then!  So far it's been slow going.

I guess that's it for an update.  There is a lot more to talk about, but I don't suppose anyone would really want to read 20 pages of my ramblings in one stretch!  So, until next time - stay crafty my friends.